Product Specifications

Manufacturer

Launch

Condition

New

Weight

7500 g

Launch X-PROG 3 / X-PROG3 Advanced Immobilizer

Launch X-PROG 3 / X-PROG3 Advanced Immobilizer & Key programming Module Description:

Launch X-PROG 3 is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

Key Programming Tools From Launch with Product Number: MK23267

This Weight Product: 7500g

Launch X-PROG 3 Advanced Immobilizer & Key programming Module Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Launch X-PROG 3 Advanced Immobilizer & Key programming Module Functions :

1. Read BMW engine ISN code.

2. Read/write BMW CAS4+ and FEM chips.

3. Read/write Audi fifth-generation steering column chips

4. Read/write EEPROM.

5. Read/write MCU.

6. VW Fourth-generation Dump Mode All Keys Lost.

7. Read engine in BENCH mode.

8. Read gearbox data.

More features are constantly updated

XPROG3 Advantages (Cloning function only available with PAD V/PAD VII/Pro5/Turbo/ Throttle etc)

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Launch X-PROG 3 Advanced Immobilizer & Key programming Module Advantages:

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

Launch X-PROG 3 Advanced Immobilizer & Key programming Module Specification:

Interface

DB26, DB15

Input Power

DC12V

Working CurrentMax

500mA

Power Consumption

5W

Storage Temperature

-20℃~70℃

Working Temperature

0℃~50℃

Size

228*120 mm

Launch X-PROG 3 Compatible With Multiple X-431 Series Diagnostic Tablet:

X431-Throttle, X431-Throttle III,  X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE

X431 Pros, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

Launch X-PROG 3 Supported Chip Brands:

It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.

Supported EEPROM Brands:

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.

X-prog3 ECU TCU Clone Function Only with high-end tablets (PAD5, PAD 7, PRO5, IMMO PLUS etc)

XPROG3 Operation Connection:

Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc

Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.

Launch X431 X-PROG vs. X-PROG3

Item

Launch X431 X-PROG

Launch X431 X-PROG3

Read/Write EEPROM

No

Yes

Read/Write MCU

No

Yes

Mercedes Benz Keys

No

Yes

Key simulator

No

Yes

VW 4th IMMO Dump Mode All Keys Lost

No

Yes

Read engine in Bench mode

No

Yes

VW 4th IMMO enumeration all keys lost

No

Yes

Read gearbox data

No

Yes

Read and write keys

Yes

Yes

Read BMW engine ISN code

No

Yes

Replace OBD reading component

Yes

Yes

Read & Write BMW CAS4+ and FEM chips

No

Yes

Read engine in Boot mode

No

Yes

Read & Write Audi 5th generation steering column chips

No

Yes

Specification

Interface

DB15

DB15,DB26

Input Power

DC12V

DC12V

Working current Max

200mA

500mA

Power consumption

2W

5W

Storage Temperature

-20℃-70℃

-20℃-70℃

Working Temperature

-10-50 0℃

0-50℃

Size

142 x72 (mm)

228 x120 (mm)