Product Specifications

Manufacturer

Microtronik

Condition

New

Autohex II HW4 and the essential features needed to program BMW keys for E and F series, solving all cases including all keys lost

Using this kit you can do following:

Read old ISN in BMW E series for following Ecus:D62M57A0,  D62M57B0,  D60PSA0,  D50M57A0,  D50M57E1,  D60M47A0,  D60M57A0,  MEV9N46L,  ME9N45,  ME9N62,  ME9E65_6,  N73_L0,  N73_R0,  ME9N62_2,  MSV70,  MS450DS0,  N62_TUE,  N62_TUE2.

Read Long ISN (SK) in BMW E series from following Ecus:  MSV80,  MSD80,  MSD81,  MSD85,  MSD85Y,  MSS60,  MEVD176K,  ME17N45,  MED17_2,  MED17_2N,  MEV17_2,  MEV17N46,  MEVD174K, MEVD174KW,  MV1722,  MVD1722,  MEVD172,  MEVD1724,  MEVD1725,  MEVD172Y,  MEVD17KW,  D70N47A0,  D70N47B0,  D71N47A0,  D71N47B0,  D71N47C0,  D71N47D0,  D72N47A0,  D72N47B0,  D73N47A0,  D73N57A0,  D73N57B0,  D73N57C0,  D73N57D0

Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y,  MEVD172,  MEVD1724,  MEVD1725,  N63TU_L0,  N63TU_R0,  S63TU_L0,  S63TU_R0

Read long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)

CAS1, CAS2, CAS3 and CAS3+ read only ISN and SK

Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)

Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,...)

Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)

Unlock secrity of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.

Read ISN of MSD85, MSD87, MSV90 in F series.

Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List).

Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.

Read and write other modules from BMW,Mercedes, Audi, and others BDM protocol by HexTag tool.

Modify KOMBI Mileage by HexTag tool.

Renew all BMW keys, and many other brands by HexTag tool.

What you miss in this Kit:

BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)

Modify ISN/SK in DME, DDE and CAS by OBD (can be ordered later)

Reset EGS 6HP/8HP EWS (can be ordered later)

Ecu Coding, and Vehicle Order managing (can be ordered later)

ISN Reading from Tricore Ecus by boot mode. (can be ordered later)

What you get:

Autohex II Hardware WVCI HW 4

The powerful HexProg

BMW Software Lite Locksmith License

Key Programming License

BMW ISTA/D driver to run dealer software

1 year technical support

1 year hardware warranty