Dfox Original ECU OBD Programming Device ( Basic Version )

Product Description:
Dfox Ecu Programming Device It Is A Device That Is Used To Read And Write Engine Control Units (Ecu) Obd, Flash And Eproom In Bench And Boot Mode In Heavy Vehicles, Passenger Cars, Motorcycles, Marine And Construction Vehicles.
Tuning Tools From DFB Technology with Product Number: MK2429
This Weight Product: 3500g
Specs:
Manufacturer: DFB Technology
Condition: New

Note: This Device Requires Software Activation
About DFB Technology
DFB Technology offers solutions for reading and writing engine control units and automatic transmission of cars, motorcycles, boats, tractors, trucks and industrial machines. DFOX is an essential tool for motor enthusiasts and specialized mechatronic technicians who wish to use a complete and versatile tool. 
DFB Technology DFOX ECU Programming Package Advantages:

There are many solutions provided by DFB TECHNOLOGY.
DFOX allows you to read and write engine control units, automatic gearboxes, and more.
It also allows the complete cloning of the control units.

DFB Technology DFOX ECU Programming Package Protocols:
DFB Technology solutions provide a wide range of protocols:

OBD driver for communication via the car diagnostic socket.
BENCH MODE driver for communication via the external pinout of the control unit.
BOOT MODE / BAM driver for low level communication.
JTAG MODE driver for low level communication.

All this for ECU (Engine Control Unit) and TCU (Transmission Control Unit).
All this in one device.
Professional technical assistance, operating manuals for each control unit:

reading the original file
write the modified file
automatic calculation of Checksum / RSA / CVN in writing
restoration of the original configuration and back to stock functions 

DFB Technology DFOX ECU Programming Package Supported Vehicles:
Modern vehicles have an increasing presence of electronic components.Thanks to DFOX you can work to read the contents of the processor, the flash and the Eeprom of the ECU, repair, clone or improve performance always in compliance with current regulations. With DFOX you can intervene on the control units of the various models of cars, motorcycles, tractors, trucks, marine vehicles, and industrial engines.
DFOX allows serial communication with the Engine and Automatic transmission control units via the OBD diagnostic socket. It is a professional software for reading and programming the control units of:

Cars
Trucks
Motorbikes
Tractors
Boats

Additional TCU package available for Automatic Transmissions. 

DFB Technology DFOX ECU Programming Package Areas of Use:

 OBD Mode

Do you need an OBD ECU reading and remapping tool? DFOX is the perfect technology for you!
DFOX allows serial communication with the engine and automatic gearbox control unit via the OBD diagnostic socket.

BENCH Mode

Are you looking for a tool for reading and remapping ECUs in BENCH mode? DFOX is the professional tool that’s right for you!

BOOT Mode

Are you looking for a tool for reading and remapping ECUs in BOOT mode? Discover all the advantages of DFOX!
DFOX is the tool for reading and remapping engine ECUs in BOOT MODE. This advanced system allows communication with the low-level processor.

JTAG Mode

Do you need a tool for reading and remapping ECUs in JTAG mode? DFOX is the perfect professional tool for you!
DFOX is a unique professional solution for mechatronics, which allows you to read and remap engine ECUs via JTAG MODE systems, supporting communication with the low-level processor. 
DFB Technology DFOX ECU Programming Package Technical Features:
FULL READING AND WRITING VIA PINOUT IN BENCH MODE:

BOSCH EDC7
BOSCH EDC16
BOSCH ME9 / MED9
BOSCH MD1
BOSCH MG1
AURIX TC29x
FREESCALE SPC5777
ST SPC58
BOSCH EDC17
BOSCH MED17 / ME17
SIEMENS PCR2.1 (Possibility of unlocking also via pinout)

 FULL SYSTEM MODE VIA PINOUT (MICRO / FLASH + EEPROM) OF CONTROL UNITS:

BOSCH
CONTINENTAL
DELCO
DENSO
MARELLI
SIEMENS
TEMIC

BOOT MODE:

BOOT MODE C167 29Fxxx

BOOT MODE ST K-LINE / RX-TX / CA
BOOT MODE Tricore for micro
BOOT MODE Renesas
BOOT MODE Mitsubishi

ST10F168
ST10F269
ST10F273
ST10F275
ST10F276
ST10F280
ST10F296

TC1724
TC1728
TC1738
TC1762
TC1766
TC1767

TC1782
TC1791
TC1792
TC1793
TC1796
TC1797

SH7052
SH7054
SH7055
SH7058
SH7059
SH7251
SH72543
SH72544

MH7202
MH7203
MH8102F
MH8105F
MH8106F
MH8202
MH8206F
MH8301F
MH8304F
MH8405F

BOOT BAM SYSTEM MOTOROLA

SPC5674
SPC5777

BOOT MODE Fujitsu
BOOT MODE Hitachi

BDM AND JTAG MODE FOR:

BDM MPC 55x
BDM MPC 56x
BDM MC32 / ZC32
BDM HC12 / S12x
JTAG NEXUS MPC/SPC 56xx
JTAG NEXUS MPC 55xx
JTAG RENESAS

SH7055
SH7058
SH7059
SH7251
SH72543
SH72544

JTAG NEC 76F00xx

76F0038AGD
76F0038GD
76F0039AGD
76F0039GD
76F0040GD
76F0070
76F0085

ADDITIONAL PACKAGE FOR AUTOMATIC TRANSMISSIONS:

COMPLETE READING AND WRITING TCU (MICRO + EEPROM)
TCU ECU CLONING
TCU CODING FUNCTIONS

DFB Technology DFOX ECU Programming Package Compatible operating systems:

Windows 7
Windows 8/8.1
Windows 10
Windows 11!

DFB Technology DFOX ECU Programming Package Minimum recommended requirements:

CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB

DFB Technology DFOX ECU Programming Package Subscribtion

This tool uses an annual subscription model for updates, support and online services. The first year is included, value 600–1200 euros, depending on tool configuration. It is not mandatory to renew the subscription each year, however, services which require subscription will not be available.
The subscription restarts from the month in which the customer decides to renew it.
If the customer postpones the renewal, they do not have to pay for the time in arrears. About half of the protocols still work without a subscription. 
The price of the conversion from Slave to Master depends on the type of solution purchased.

DFB Technology DFOX ECU Programming Package Content: 

DFOX tool
OBD cable for cars (orange)
OBD cable for trucks (blue)
Bench box V.2
Multifunction cable for bench / pinout / boot connections
Banana connector
Kit BDM adapters
Adapter for templates
Red / black cable for powering the ECU via Bosch adapters and template adapter
Flat gray cable for BDM
Long rainbow flat cable for JTAG for MPC and RENESAS processors
Short rainbow flat cable for NEC processor JTAG readings
Extensions for connections on board for Renesas boot
Dip-Sip connectors to be welded
Male jack adapter to power the tool via external battery (in case of need for control units that need high amperage)
Kit round faston adapters green
Kit square faston adapters black
Kit bench mode EDC7 blue
Kit electric components
Power supply 12V
Y cable
USB cable
Case for flat and BDM / JTAG boards
Portable tool case 

Downloads

DFOX User Manual
ECU Driver list (Engine)
TCU Driver list (TCU - Gear)

DFOX Setup