Launch TLT240 SB - BASE PLATE TWO POST LIFT: 2-pole electro-hydraulic, symmetrical lift with lower synchronization for installation in service stations with a limited ceiling height. And Differs from Launch TLT240 SB BASE PLATE TWO POST LIFT in the presence of an electromagnetic stopper.
Features
1. Bilateral manual safety unlocking system.
2. The cable and oil pipe are fully concealed with decent and elegant appearance.
3. Double hydraulic cylinder and high strength chain drive makes stable and smooth lifting and lowering.
4. Wire rope equalization system forces synchronous movement of two carriages and effectively prevents vehicle form tilting.
5. 24V low voltage control box (IP54 level) ensures operator's safety.
6. 24V cylinder travel limit switch effectively protects cylinder and extends its lifespan.
7. Door rubber pad protects car door from being damaged in collision.
8. More lifting pads with different height meets the requirements for light lorries and SUVs.
9. Passed 115% dynamic loading test and 150% static loading test .
10. CE certificated.
Specifications
Item |
TLT240 SB |
Lifting capacity: |
4.0 t |
Lifting height: |
1950 mm |
Lifting time to maximum height: |
50 sec |
Lowering time: |
40 sec |
The width of the opening for the passage of vehicles: |
2486 mm |
Minimum height of pickups from the floor: |
110 mm |
Dimensions: |
height: 2780 mm width: 3370 mm |
Noise level: |
up to 80 dB |
Compressor operating pressure: |
16MPa |
Motor Parameters: |
1three-phase \ single-phase 380V / 50Hz 2.2kw \ 220V / 50Hz 2.2kw |
![]()
![]()
![]()
Terms of Use
Item |
TLT240 SB |
Operating temperature range: |
-5 ° C ~ + 40 ° C |
Transportation / Storage Temperature: |
-5 ° C ~ + 40 ° C |
Relative humidity: |
at a temperature of +30 ° C, no more than 80% |
Height above sea level: |
no more than 2000 m |
