Product Specifications

Manufacturer

Xhorse

Condition

New

Xhorse VVDI BIM Tool BIMTool Pro Updated Version of VVDI BMW & VVDI Mini Key Tool Device

Product Description:

Xhorse VVDI BIM Tool BIMTool Pro Updated Version & Xhorse VVDI Mini Key Tool Device

Key Programming / ECU Diagnostics Tools From Xhorse with Product Number: MKON210

This Weight Product: 2300g

Specs:

Manufacturer: Xhorse

Condition: New

VVDI BIMTool Pro New Features:

Add Ethernet port, Support 10/100M programming via Ethernet.

Support WIFI 802.1b/g, 150Mbps high-speed connection, and WIFI OTA upgrade

Support DoIP Vehicle/Module Programming

Support BMW ECU programming (NBT/CIC) (connect via network cable)

Greatly speed up the F/G Chassis programming (connect via network cable)

Support BMW E-sys and Rheingold Diagnostic System. Able to replace the specialized devices. (connect via network cable)

Support directly read ISN data without disassembling the ECU (N13 / N20 / N55 / N63)

Works on All Windows computer, like win7, win8, win10, no computer operation system limitation.

Note:

Don't use the Enternet cable and USB cable at the same time. For key programming,use usb cable,coding use Enternet cable.

When connect VVDIBIM device with PC, it will display"Booting" on little screen, after 20 secs it will display as "BMW", then it is connected OK.

VVDI BIMTool Pro and VVDI BMW Tool use same software, and some functions in the software will prompt you to use bimtool.

VVDI BIM Tool Pro Functions:

OBD Key Learn: Support CAS1/ CAS2/ CAS3/ CAS3+/ CAS3+ISTAP/ CAS4/ CAS4+ version.

File Key Making: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+,etc. As for CAS1/ CAS2/ CAS3/ CAS3+ system, support reading EEPROM and synchronous code data.

Support FEM/ BDC System Generating Key, Replacing FEM/ BDC Control Units, Reset Mileage.

Mileage Correction: Support CAS1/ CAS2/ CAS3/ CAS3+/ ISTAP/ CAS4/ CAS4+ odometer correction.

Detail Functions of VVDI BIMTool:

1. E-Series programming, coding, DTCs

Support autodetect car chassis

Support scan all car units

Support calculate all configuration units

Support read/write car configuration(FA)

Support input HW/ZB number to programming

Support calculate default coding from FA

Support edit detail coding information, change car config

Support many languages DTC code

2. F-Series programming, coding, DTCs

Support autodetect car chassis

Support read/write car configuration(FA)

Support calculate programming files from unit, car, whold database

Support calculate default coding from FA

Support edit detail coding information, change car config

Support detail special function list from coding

Support many languages DTC code

3. CAS1/CAS2/CAS3/CAS3+/CAS3++ISTAP OBD key learning

Support read key information, write key inforamtion

Support key learning

Support read/write EEPROM

Support read ECU/gearbox synchronize codes

Support write ECU/gearbox synchronize codes

Support synchronize ECU and CAS

Support synchronize CAS and ELV

Support read ISN via OBDII

Support reset KM via OBDII

Support disable key/enable key

4. CAS4(1L15Y)/CAS4+(5M48H) OBD key learning:

Support read CAS encrypt key via OBDII

Support key learning via programmer and via ignition switch

Support disable key/enable key

Support erase key position

Support reset KM via OBDII

Support read ISN via OBDII

Support backup/restore coding

Support update original CAS4 file

5. FEM/BDC OBD key learning:

Support read FEM/BDC encrypt key via OBDII

Support key learning via programmer and via ignition switch

Support disable key/enable key

Support erase key position

Support reset KM via OBDII

Support read ISN via OBDII

Support backup/restore coding

Support exchange used FEM/BDC

Support close/open transport mode

Support reset ECU lock

Support switch on ignition without working key

6. CAS EEPROM dump key learning:

Support EWS1, EWS2, EWS3, EWS4, CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y), CAS3++ISTAP(0L15Y, 0M23S)

Support prepare dealer key via programmer

Support disable key/enable key

Support read ISN from working key

7. 8HP Gearbox renew:

Support clear ISN in 8HP gearbox

Support backup/restore coding

Support reset adaptation information

8. Read synchronize code from E-Series ECU: Support MEV9N46L, MSV70, MSS60, MS450, N62 etc

9. Read E-Series/F-Series ECU ISN via OBDII

Support MSV80, MSV801, MSD80, MSD81, MSD802, MSD812, MSD851

Support MED17xx/MVD17xx/MEVD17xx/MV1722

Support MED172/MEV17N46/ME17N45

Support MEVD172Y/MEVD172/MEVD1725/B38/X63TU

10. Support exchange ECU and CAS:

Support write ECU ISN via OBDII

Support write ECU VIN via OBDII

Support change ECU ISN and VIN with EEPROM dump

Support chagne CAS1/CAS2/CAS3/CAS4 ISN and VIN with EEPROM dump

11. CAS repair(OBD&EEPROM)

Support repair ISTAP CAS

Support repair CAS EEPROM(Service mode EEPROM), you can start engine after repair the file(CAS1,CAS2,CAS3,CAS3+,CAS3++ISTAP)

12. CAS3+/CAS4+ lost all dump file support restore ISN and VIN

Support CAS3+(1L15Y) encrypt version

Support CAS3++(ISTAP) version

Support CAS4+(5M48H) version

13. File KM calibration

Support EWS1, EWS2, EWS3, EWS4

Support CAS1(0K50E), CAS2(2K79X), CAS3(0L01Y), CAS3+(0L15Y, 0M23S)

Support CAS4(1L15Y), CAS4(5M48H, 1N35H)

Support E-Series dashboard EEPROM(M35080)

Support F-Series dashboard EEPROM(35160, 35128)

Unlock HITAG2 key: Support lock hitag2 key made from BMW TOOL via programmer

EWS3/EWS4 can read EEPROM, write EEPROM via CAS PLUG

Extra Details:

Related Products

Xhorse VVDI BIMTool BIM BMW Tool Pro Enhanced Updated Edition Device FREE EXPRESS SHIPPING

Xhorse VVDI Mini Key Tool Device With Free Daily Token For a Year